Rapid response

Commercial roofing on site in 24 business hours across Ottumwa, IA

Humid continental with 82 freeze-thaw cycles in southeastern Iowa's food processing and manufacturing anchor.

Ottumwa, Iowa41.020°N 92.411°WA-1 Roofing dispatch
Dispatch Notes for Ottumwa
  1. 01

    Ottumwa is at the edge of A-1's southeastern Iowa coverage zone, with response from the Waterloo-Des Moines corridor covering the market

  2. 02

    A local farm-equipment plant produces planting equipment and has a large industrial building footprint with low-slope manufacturing roofing requirements

  3. 03

    The local pork processing facility is one of the largest such operations in Iowa, with specialized condensation and drainage requirements from refrigerated processing environments

  4. 04

    Coverage area: Ottumwa's commercial roofing base spans a revitalized, high-traffic downtown Main Street district, a rail-served industrial and commercial zone, and a busy Highway 34 retail strip, a mix of low-slope downtown commercial roofs and larger-footprint retail and industrial roofs along the highway corridors.

Large-scale pork processing, a farm-equipment manufacturing plant (planter manufacturing), regional healthcare, and retail in southeastern Iowa.

Sectors Served
01food processing
02manufacturing
03healthcare
04retail
05agriculture
Climate at a Glance
Freeze-thaw
82est. / yr
Avg snowfall
24in
Avg July high
86°F
Design wind
110mph
Last spring frost
April 29
First fall frost
October 7
Freeze-free days
181days

Wapello County carries a FEMA National Risk Index tornado score of 81.8, the second-lowest tornado score of the 11 counties in this brief, with overall county risk in the 65th percentile nationally. Statewide hail, roughly 2 to 4 days per year and generally milder in the southeast than the northwest, and the Iowa May through August severe season both apply.

Dispatch ready

Dispatch an A-1 crew to Ottumwa

A 45-year commercial roofing record, on site within 24 business hours. Send the request and a crew reads your roof in person before a single line of scope is written.

Ottumwa, IA · 41.020°N 92.411°W · A-1 Roofing dispatch

Load specs · Ottumwa structural profile

Ground snow load20psf

ASCE 7-22 regional estimate, tied with Iowa City for the lowest of the 11 cities; verify with local building department or ASCE Hazard Tool.

Design wind speed110mph

Regional Central Plains estimate, 105 to 115 mph range; verify with ASCE 7 Hazard Tool or local building official.

Local roofing reference

Ottumwa roofing facts

01How often does a Ottumwa roof freeze and thaw in a year?
Roughly 82 times. Each cycle expands and contracts the membrane, seams, and flashings on a Ottumwa, IA commercial roof, which is why monolithic systems outlast seamed ones here.
02What design wind speed applies to commercial roofs in Ottumwa, IA?
The governing numbers for Ottumwa, IA are a 110 mph ASCE 7 basic wind speed at Exposure C. ASCE 7 does not use "zones"; it uses a wind speed and an exposure category, and both should be confirmed with the local building department before specifying.
03What is the average annual snowfall in Ottumwa, IA?
About 24 inches a year (NOAA 1991-2020 normals). What matters on a flat roof is where that snow drifts and how it melts, not just the total.
04What is A-1 Roofing's response time in Ottumwa, IA?
Our target is 24 business hours for a first response in Ottumwa. Active leaks are prioritised ahead of scheduled assessments.
05What snow load and wind speed do Ottumwa, IA building codes assume?
Ground snow load of 20 psf (ASCE 7-22 regional estimate, tied with Iowa City for the lowest of the 11 cities; verify with local building department or ASCE Hazard Tool.) and a 110 mph design wind speed at Exposure C (Regional Central Plains estimate, 105 to 115 mph range; verify with ASCE 7 Hazard Tool or local building official.). Treat both as the starting point and confirm them with the Ottumwa building department.
06When can coating and foam work be done in Ottumwa, IA?
The frost-free window in Ottumwa, IA runs from about April 29 to October 7, 181 days. Silicone and foam both have minimum substrate temperatures, so most full-system work is booked inside it.